Main > Main Forum

Donkey Kong Lock

(1/4) > >>

ppilot:
Hi All.  I was lucky enough to finally score a (converted) Donkey Kong Jr. Machine.  It's missing the key on the back door.  Does anyone have an idea on how to get it open (besides taking drastic measures and cutting the door off?)  I thought the locks were probably standardized, but the keys for my DK, DK3 don't fit it.

Thanks much.  Mike.

versapak:
Drill it.

Of course the locks aren't "standardized". What would be the point of a lock, if anyone could open it?


Kevin Mullins:
Is there one hanging inside on the coin door when you open it? (open the coin door that is) Or possible in the coin box itself.

If not.... you have the option of a locksmith... or drilling it out.

versapak:

--- Quote from: Kevin Mullins on July 11, 2006, 10:38:31 pm ---Is there one hanging inside on the coin door when you open it? (open the coin door that is) Or possible in the coin box itself.

If not.... you have the option of a locksmith... or drilling it out.

--- End quote ---



Locksmith will cost ya the $$$, and then you'd still need to replace the lock anyway.

You get a chance to destroy something with a power tool, then it is your manly duty to do so. :)


Mario:
I opened a lock by inserting a large screwdriver into the key slot, then locking a pair of vicegrips on the screwdriver, and turning it with lots of force. It simply broke the lock pins and the lock turned freely.

Mario

Navigation

[0] Message Index

[#] Next page

Go to full version