Main > Buy/Sell/Trade - non-retail

WTB 6-pin molex connector

(1/2) > >>

sdrob04:
I have the following trackball...

http://www.happcontrols.com/trackballs/560110xx.htm

...and would like to keep the existing AMOA harness intact (i.e. not hack it off).  I need a 6-pin female molex (with metal inserts) to plug into the existing connector on the factory harness. 

Does anyone have one of these connectors they could sell?

Q*Bert_OP:
If not, try Radio Shack...they sell just that side separately,with pins...

shardian:
For my trackball, the radio shack molex did not match up with the existing plug. I just went ahead and bought a matching set, and switched out the existing plug for a new one.
Good luck

sdrob04:
Thank you for the warning on the Radio Shack plug!  I would not have expected more than one version of a 6-pin female molex connector.  The male/female combo seems like the way to go in this case.

TheRed:
oh no, molex pins come in a TON of different types. The astro city cabinet's being the hardest for me to find. I have a shop local to me called HSC and they have just about every type you could think of....

...except the right size of the Astro City type :(

Navigation

[0] Message Index

[#] Next page

Go to full version