Main > Main Forum

Unresponsive Microswitches

<< < (4/4)

shbon:
I think this thread did actually refer to an isolated IPAC issue... Read this thread over at the Ultimarc Board :
http://www.mameworld.info/ubbthreads/showthreaded.php?Cat=&Number=76627&page=0&view=expanded&sb=5&o=&fpart=1&vc=1

Shaun

hanelyp:
My initial thought was that if a button is pressed and released fast enough the signal could fall between samples on that input and be missed, or maybe too brief a press with enough switch and wire resistance might not pull the signal far enough to register.  The latter might be fixed by double checking all contacts and cleaning the switch.

Navigation

[0] Message Index

[*] Previous page

Go to full version