Main > Main Forum
Q-bert controls software asjustment ?
Level42:
I know some people have a dedicated 4 way stick that they turned 45 degrees to play Q-bert. Isn't there a software way to "translate" the diagonal signals of an 8 way stick to the correct signals for Q-bert ? I know it can't be done by keyboard settings in mame (or can it ?) Please, no discussion about wether this is the "real thing" or not....just the software part please :D
ahofle:
It can be done in MAME. Just point your joystick down and left at the same time when mapping an input and MAME should register "DOWN+LEFT" for example. Works pretty well actually.
dpz147:
--- Quote from: ahofle on May 25, 2006, 02:46:30 pm ---It can be done in MAME. Just point your joystick down and left at the same time when mapping an input and MAME should register "DOWN+LEFT" for example. Works pretty well actually.
--- End quote ---
Would you have to use an 8-way for that? I have p360's and I would think the one set in 4-way mode wouldn't register "down+left"?
ahofle:
Hmmm, I'm not sure as I don't have a P360 (unfortunately). But I'm guessing you're right -- it wouldn't work if the 4-way mode prevents both down and left signals simultaneously.
Level42:
Of course it has to be in 8 way mode. Else the P360 will not put out the diagonals. I'm actualy asking this since I want to use it with my Suzo Inductive. From the joysticks controller (I-pac/J-pac, whatever) point of view, these are the same.
However, I now also understand the problem. What does Q-bert do when you hit a up, left, right or left ONLY, instead of the diagonals ? You need to disable or filter out these signals. THAT is the problem :D
Navigation
[0] Message Index
[#] Next page
Go to full version