Software Support > DOS/WinCab

X-Arcade Controls with WinCab

(1/2) > >>

KentuckySinner:
Hey Folks,

I'm working on getting the PC up and running while I wait on the cabinet, and I recently setup the X-Arcade 2 Player controller to the computer.  I have it working beautifully with Mame32, but I'm having trouble getting the X-Arcade Controller to work with Wincab.   Does anybody have a sample controls.ini file that they've used with the X-Arcade controller that they could cut/paste or email to me?  The only response that I can get is from the mouse and the keyboard.

I have the keyboard plugged into the X-Arcade controller and the X-Arcade into the PS/2 Port.  That may change as I hope to eventually get a wireless keyboard (rather than constructing a keyboard drawer).  Not sure if the receiver will plugin to a USB or the X-Arcade's Keyboard port.

I'm using a 1ghz Duron, 512mb ram, 64mb nvidia graphics card, and WINXP if that makes any difference.

Myself and the 'Slave I MAME Project' appreciate any info.

KentuckySinner:
D'oh.  I had this link to the X-Arcade button layout as well.

http://www.x-arcade.com/service/images/Layouts/Printable/PC-MAC.htm



Again, any help is appreciated. 

Chris:
What would you like the buttons to map to?  Are you planning to use a "classic" skin or a CD-style skin?

--Chris

KentuckySinner:
I'm using a CD Style Skin displaying 4 albums.  I'd like buttons '1' and '2' on the Controller to serve as coins/credits.  The controller stick (p1 only is fine) to move through the song selections.  The "Left Ctrl" Button to select the songs.    Buttons labelled 'C' and '5' I would like to scroll left/right through the albums.   I dont have the machine in front of me, but I think that's the primary functionality that I need.    Beyond that, I have no preference for other options/controls.  I spent a little bit yesterday messing with the default controls.ini but couldn't get a response out of the X-Arcade.  Keyboard/Mouse worked fine though. I may have had some buttons cross-mapped though.

Chris:
Try this:

KEY_2_PAD = BTN_GUI_DOWN
KEY_4_PAD = BTN_GUI_LEFT
KEY_6_PAD = BTN_GUI_RIGHT
KEY_8_PAD = BTN_GUI_UP
KEY_LCTRL = BTN_GUI_SELECT
KEY_F = BTN_GUI_DOWN
KEY_D = BTN_GUI_LEFT
KEY_G = BTN_GUI_RIGHT
KEY_R = BTN_GUI_UP
KEY_A = BTN_GUI_SELECT
KEY_C = BTN_PREVPAGE
KEY_5 = BTN_NEXTPAGE
KEY_1 = BTN_COIN1
KEY_2 = BTN_COIN2

--Chris

Navigation

[0] Message Index

[#] Next page