Main > Main Forum

keybard splitter query

(1/2) > >>

Svaroh:
i just noticed after gathering all the required materials that this circuit http://dragonsden.emuunlim.com/arcaded/split.htm
is for an old 5 pin DIN, is there a reasonably simple way to swap the 5 pin DIN for a 6pin DIN(PS/2) connector?

RandyT:

--- Quote from: Svaroh on February 06, 2006, 12:34:02 pm ---i just noticed after gathering all the required materials that this circuit http://dragonsden.emuunlim.com/arcaded/split.htm
is for an old 5 pin DIN, is there a reasonably simple way to swap the 5 pin DIN for a 6pin DIN(PS/2) connector?

--- End quote ---

The two connectors are signal compatible, but are physically in different arrangements.  Look up the pinouts of each connector and you will see how to make one look like the other.

Both really use only 4 connections.  Clock, Data, 5v, and Ground.

RandyT

Tiger-Heli:
Stephen Hans has the pinouts for both circuits on his site - http://www.ionpool.net/arcade/mame/keyboard_hacks/tricks.html

(Took a while to find that, though).

Svaroh:
sweet! thanks guys, every time i found a link to stephen hans site it was a dead link/old link. you guys rock, and quick too

Grasshopper:
Also check out:

http://www.hardwarebook.net/adapter/userinput/dintominidinkeyboard.html

&

http://www.hardwarebook.net/adapter/userinput/minidintodinkeyboard.html

Navigation

[0] Message Index

[#] Next page

Go to full version