Main > Main Forum

MDF ??

(1/2) > >>

ian_d:
Hi Guys,

Im just about to start my project, but have found out that the biggest sheet of MDF available here in Sydney is 2400mm x 1200mm

do i need to make any adjustments in the measurements ?  Im planning on building the plans from the book

Thanks

Ian

markrvp:
My rough conversion shows the plans for the cabinet sides to be approximately 2000mm tall by 910mm wide, so you will be fine.

elvis:
I used 2400x1200 sheets for my LuSiD-based cab.  On the "design" page you can download the metric plans in PDF, and see how much waste you can roughly expect from each sheet:

http://benchmark.mameworld.net/cab1/

As above, 2400x1200 is fine.

Bones:
inches X 25.4=mm

ian_d:
Thanks Guys

Im off to the hardware store on Sat, found out today that they can make cuts for $1, although i thought that this was expencive at first, it does pay for any mistakes im sure to make, so im going to have a good look at the plans and decide on how many to get done.

I Figure that this takes the error out of things, saves money on tools i dont have, makes transport easier, build time quicker etc etc (should cost $15 max)

I Cant wait to get stuck into this project, i will take photos on the way, and post them here (if successfull)

Saint - Thanks for writing the book, and sorry for originally posting this in the wrong forum.

My kids (aged 8 & 6) love and cant wait for this project, so if all goes well im planing a mini cab for them - just dont tell the Mrs !!


Great forum, i have learnt so much, but still have pleanty to learn. I only found this forum about a month ago, and id never dreamed about building an arcade game before now .......... well cant wait to start, buying the book was a great start


I will probably still need some help wilh CP layout, Artwork and set up (to name a few) so i appoligise in advance for all the dumb questions


Gee, i wish i lived in the US as it seems you guys are really catered for, there is nothing here in sydney (apart from a big bridge and an Opera house!)


'Thanks



Ian

Navigation

[0] Message Index

[#] Next page

Go to full version