Main > Main Forum
t-molding Slot cutter with or without bearing?
jberries:
Hello
I want to put t-molding on my cabinet, but don't know a lot about routing. Is it necessary to have a bearing on the router bit?
Here are the 2 bits I am looking at (one has a bearing the other doesn't)
http://www.linbide.com/product.php?sid=3772&pid=107&rid=15431&action=add
http://www.linbide.com/product.php?sid=29167&pid=106&rid=19912&action=add
I am looking at the 1st one on both pages, the 1/16" bit.
Any thoughts?
Many thanks
RandyT:
You need the one with the bearing.
The other is designed for use with a table fence that controls the depth of the cut and keeps the edge of the board from coming into contact with the spinning arbor.
RandyT
Kobex:
Also, you can get a better price at mlcswoodworking.com.
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_slot.html#Anchor%20slotct3w
jberries:
Cool, thanks a lot for the responses!!!!!!
eccs19:
I just got one with the bearing, and it works great. Took no time at all to do the job. Just make sure your cutting the right direction.
Navigation
[0] Message Index
[#] Next page
Go to full version