Main > Main Forum

control panel interface question

(1/2) > >>

vandel98:
I'm in the process of planning/purchasing for my first cab.  My question comes in on the best way to interface the components I have already.

3 Happ Joysticks & 18 buttons (2 8 way and 1 4 way joystick)
1 3" Betson Imperial Trackball PS/2
I was looking at the new Cyclone Spinner which says it interfaces with the optipac
http://www.arcadegames4u.com/pc-50-48-cyclone-spinner.aspx

Normally I've read that folks will use the optipac for the spinner and the trackball, but this trackball is PS/2.  I've got the IPAC2 for the joysticks and buttons.

Any thoughts on how I should interface this all together.  Should I still use an optipac, go with a minipac.  So many options and so much confusion.

Thanks,
Pete

ahofle:
You could go with the Ipac2 for the buttons and sticks and use Randy's new spinner/trackball interface for the spinner (it's cheaper):

http://forum.arcadecontrols.com/index.php?topic=47866.0

vandel98:
Does it have an input for my PS/2 trackball?  For that matter Does the optipac?

jjd:
Did you try plugging the PS/2 plug into your PC to see if it works without another interface board?

ahofle:

--- Quote from: vandel98 on January 13, 2006, 11:06:07 am ---Does it have an input for my PS/2 trackball?
--- End quote ---

Navigation

[0] Message Index

[#] Next page

Go to full version