Main > Software Forum

GPWiz49 button config

<< < (2/3) > >>

Nailz:
Thanks for that, I looked at joy2key and everything I have found made it appear to be a linux only program, is there a windows download for it as well?

I found rbjoy and that seems to work, but I am unable to find anything that shows how you can load a config for it from the command line, it appears to be all GUI driven.  So while it does indeed work, I would need to load up to windows, use a mouse to load the config from the gui, then start my front end.  It would be nice if I could just run a batch file to load the config, and have my front end load up automatically as well.

mccoy178:
Here is the link to joytokey:

http://www.electracode.com/4/joy2key/JoyToKey%20English%20Version.htm

I found this link at www.mameworld.info in the mamewah forums under the useful links thread of Minwah's.

Nailz:
Awesome, thanks!

AllisterFiend:
There is a newer version that can be downloaded from this location.

Version is 3.7.9 and it is about 308k in size.

http://forum.lik-sang.com/attachment.php?s=6fe12d83de9f70536791f31ae3332812&attachmentid=2381&d=1130820983


Allister Fiend

edge:
mark / mccoy,
Because you have to run an additonal piece of software like joy2key with the GPWiz, do you see any delay at all between button press and reaction in mame/emus?

Just wondering.. I am upgrading my control panel, and will be going from a minipac (2 8-ways) to a new setup with 2 GPWizMax's and 2 49-ways.

Thanks for the info.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version