Main > Main Forum
Bezel Madness
Roughy:
--- Quote from: Farmboy90 on January 06, 2006, 04:10:40 pm ---
--- Quote from: Roughy on January 06, 2006, 04:05:16 pm ---
As far as the window tint--are you serious?
--- End quote ---
--- End quote ---
Roughy:
Got the exact-cut plexi in place. Looks out standing over the bezel--
One thing about the Happ 19" bezel (or maybe a couple of things):
Although it's 25x25 and my opening in the UAII kit is 27x25, it was still a tiny bit tall--probably an issue with the kit, but nothing major. I used a grinder to slice off about 1/8" off the top and then I used my plexi glass scoring tool to score the inside of the bezel--just to make it fit my 21" monitor.
That worked out like a dream for trimming it and then went over my imperfections with the grinder again, just for a better look.
After that, I'm about an inch short on width, so I've purchased weather stripping and I'm using double-sided tape to stick it to the sides of the cabinet (there's wooden pieces that are sort of "stoppers" to catch your bezel/plexi) and they seal off the rest of the light that was coming through.
Looks great, works great, plays great!
DrewKaree:
As if anyone would somehow expect MORE out of me? ;D
Mrs Bones confided in me the same dang things, almost verbatim. I'm starting to think you're Mrs Bones and are just here checking on the Mr. ;)
--- Quote from: Roughy on January 08, 2006, 02:40:17 am ---
I used a grinder to slice off about 1/8" off the top
That worked out like a dream for trim.
After that, I'm about an inch short on width
I'm using double-sided tape to stick it to the sides of the cabinet
and they seal off the light that was coming through.
--- End quote ---
Navigation
[0] Message Index
[*] Previous page
Go to full version