Main > Main Forum

anyone know where i can find a bit to cut the controls, wires, and connectors?

<< < (2/3) > >>

markrvp:
I just found out that Groovy Game Gear sells the .187 insulated quick disconnects.

Here is the LINK


Home Depot will have the 1-1/8" Forstner bit to cut the holes in your control panel.

Find another Radio Shack if you can't get to Fry's (which is a great place to get wire).  What you are looking for is .22 guage stranded hookup wire.

muffin man:
what bout this guys

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7576681351&category=7285

markrvp:
Those will certainly work.  The actual disconnect is not insulated, but I have not found that to be an issue with panels where I have used those.  My first recommendation would still be the ones from Groovy Game Gear.  Nobody ships stuff faster than RandyT.

SirPeale:

--- Quote from: Buddabing on January 01, 2006, 10:42:28 pm ---Doesn't Peale have disconnects?

1 1/8" drill bits come up from time to time in the B/S/T forum. Post a WTB there.


--- End quote ---

I have disconnects, hook-up wire, locks, heck I even have 1 1/8" spade bits.

Buddabing:
One other friendly word of advice. Don't work on your control panel first. Work on it last. This is because:

1) You'll never finish your cabinet if you get the controls working.

2) Your control panel layout may change several times

3) You may get extra controls that you don't need.

4) If your cabinet design changes, you won't have to rip the control panel apart.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version