GO7 pic still not wide enough

[Doughbroz]

Installed cap kit and new horizontal width coil in GO7 CBO, B+ is 120V, width coil adjusted to maximum, but pic is still an inch short on each end.  Any other components that can be changed to widen the picture?  Thanks.

[Karetaker]

On the G07 you can increase the microfarad value of "C515".  It should be a .53 microfarad, 400v capacitor.  Just make sure you replace with the same value voltage or higher.

[Doughbroz]

Thanks Karetaker.  I will assume that the percentage increase of the value will result in a corresponding increase in width, and try it soonest.