Main > Main Forum

coin switch quick disconnects

(1/3) > >>

TravistyOJ:
Hey, I feel stupid for asking this.  But what is the size of the terminal on coin switches, I need to get QDs, and they are not .187.  Any ideas?

rdagger:
I don't know the size but Radio Shack sells combination packs that contain the small ones you need.

Ken Layton:
Well, it depends on the make & model of the coin door. Some have switches with 1/4"  (.250") wide terminals while others have 3/16" (.187") wide terminals. Some of the lamp socket terminals are even smaller at .110"

brian23:
My coin door switch uses the same size quick disconnects as the Cherry microswitches. I have a Coin Collectors door (not Happ). A quick hack you can do if the QD is too big, place the QD on the small terminal and mash the metal part of the QD down with the crimper. This will hold it in place. Recommended as a temporary solution.

brian23:
This is what I used on my microswtiches:

.187 Female QDs:

http://shop.jammaboards.com/view_product.php?product=QD-187-10&searchlink=yes&search=.187%20QUICK%20DISCONNECTS&page=1


42-0351-00 LAMPHOLDER,F/PLASTIC MECH HOLDER (Happ Part)

.110" Female QDs:

http://shop.jammaboards.com/view_product.php?product=QD-110-100&referrer=Froogle&campaign=JB_Products&advert=QD-110-100

Navigation

[0] Message Index

[#] Next page

Go to full version