Main > Project Announcements

Willow cab

(1/3) > >>

eightbit:
I finally completed the write up of my first cab. Its located at http://mame.hower.us/willow.

Feedback is welcomed and encouraged, its complete but like most cabs never done.

Silverwind:
nice work.. Mr. Do! would be proud ;)

nice contrast with the red t-moulding

Dartful Dodger:
It looks good.  That painting the bezel from the inside of the glass, is a good idea.

How did you put in that track ball?
I got the same one off ebay(probably from the same guy).
Can you tell me what color wires do what?
I didn't get a schematic, and I've long since lost the contact info for the guy.

Thanks

eightbit:

--- Quote from: Dartful Dodger on January 22, 2003, 06:32:28 pm ---How did you put in that track ball?
I got the same one off ebay(probably from the same guy).
Can you tell me what color wires do what?
I didn't get a schematic, and I've long since lost the contact info for the guy.

--- End quote ---
I cut a hole for it to fit snugly in the CP. Then I took the trackball apart and screwed from inside the upper half into the edge of the plywood. It worked great.

Mine had a PS/2 interface on it, it didn't come with a schematic.

Animeka:
Black wires are ground, the rest are the 3 "mouse" buttons. Just test it using windows, simply short a black wire with one of the others to see what button does what. You can easily find the right click and left click buttons, that leaves you with the 3rd one being the middle button.

Marc


--- Quote ---
How did you put in that track ball?
I got the same one off ebay(probably from the same guy).
Can you tell me what color wires do what?
I didn't get a schematic, and I've long since lost the contact info for the guy.

Thanks

--- End quote ---

Navigation

[0] Message Index

[#] Next page

Go to full version