| Main > Monitor/Video Forum |
| The Monitor FAQ |
| << < (13/16) > >> |
| menace:
Northerngames brought this to my attention--Nanao monitor schematics as well as a few chassis pics(contributed by segasonicfan apparently): http://files.filefront.com/Nanao+Schematicszip/;8697391;/fileinfo.html thanks! |
| SirPeale:
Horizontal Collapse Vertical Collapse |
| Lutus:
Here is a short video tutorial I did for Bender on how to adjust the B+ voltage on my Sanyo20EZ monitor in my Donkey Kong machine. B+ Adjustment tutorial: This method can be used for all monitors. Reference your monitor's manual to determine the correct B+ voltage test point and what the expected B+ voltage should read. :cheers: |
| jono:
what does adjusting the b+ voltage do? as in the appearance on the screen |
| Lutus:
Maladjusted B+ can do many things to screen geometry. In my case. I could not tune in the FOCUS and my HORIZTONAL deflection was such that I could only fill about 45% of the screen with the video signal. But mine was +88V when it should have been +108V. Any lower and it might have stopped coming on. B+ is often overlooked, but it should be checked anytime after performing cap kits, HOT and flyback replacements, etc... |
| Navigation |
| Message Index |
| Next page |
| Previous page |