Main > Main Forum
Post your mame cab "guts" photos
IG-88:
--- Quote from: Mr. Bubblehead on October 31, 2005, 07:12:50 pm ---View of my cocktail with the top and monitor removed:
--- End quote ---
Damn! Thats some serious lumber you got in there! Is that a pair of 2x8's holding some of the hardware?
kastawaykid:
Here is a picture of the computer in my Upright machine. I used some old case parts to hold the PCI/AGP cards in, like my cocktail pictures above.
javeryh:
--- Quote from: kastawaykid on November 03, 2005, 12:52:50 pm ---Here is a picture of the computer in my Upright machine. I used some old case parts to hold the PCI/AGP cards in, like my cocktail pictures above.
--- End quote ---
What's all that borg-looking tubing in there? Are your wires running through them? Where did you get them? Is there any benefit?
Great thread by the way - I'm scared to start assembling the guts of my cocktail even though I have everything I need...
Spartan:
The hell with neatness -- just throw it all in there! :o
Actually, these pics were taken circa 1999 just as I was finishing it up. The IPAC is mounted on the well between 2 gutted PC speaker boards (so to have independent Left / right volume control). If I need a keyboard, I can open the lid and plug it into the IPAC.
The PC was a Pentium 233 w/ MMX (now an Athlon 1700) and the gray rectangle gadget was an Avatar Shark drive which used 250MB hard diskettes. That's how I transferred the software. Now it's on a wireless network.
The monitor was a fixed frequency 20" Intergraph (with authentic curvature!). It croaked and was replaced with a 19" flatscreen cheapo from Home Depot.
BUCKETHEAD:
--- Quote ---What's all that borg-looking tubing in there?
--- End quote ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version