Main > Buy/Sell/Trade - non-retail
FS: Lots of Coin Mechs
AlexC:
Bummer :'(
jtkauff:
Any quarter mechs left? I'm assuming not, but figure it's worth asking.
cscon115:
--- Quote from: Peale on May 06, 2006, 10:34:43 pm ---I don't have one in front of me, but I *think* there are two holes per side, top and bottom. I can say for certain in the AM.
The nibs are definitely part of the mech (molded plastic) but that's really not a big deal. If you need nibs, and there aren't any, you don't have to drill and tap, you can just take a metal nib and screw it into the mech. I do it at work all the time.
--- End quote ---
I am a tad confused. Maybe I am just silly... but you say that there are two holes per side top and bottom. This would mean that the nibs are not a molded part of the side. Then the next sentence you say the nibs are definitely part of the mech. These both can't be true at the same time.
I am looking for the mechs with threaded holes on the side. I do not want coin mechs with molded nibs. I have a bucket Happ plastic coin mechs that have the nubs molded into them and I do not want any more of these ever again.
Do your mechs have threaded holes on the side?
Do your mechs have molded nubs instead of threaded holes?
Is there a maker's name on them (Happ,Imonex,CoinMechanism) this might answer the above questions.
Dan
SirPeale:
IIRC They're Coin Controls mechs. The nibs are molded into the sides. They're hollowish, so if you remove them, there is a hole remaining. So yes, my statement is true. Both having holes on the sides AND having molded nibs. If the nib is missing you can take a metal nib and screw it right into the hole that remains.
So...overall, since there are molded nibs on these, *you* don't want them.
cscon115:
Hollow? Wow, now that is a useful bit of info.
The ones from Happ are solid and made of that rather brittle black plastic that looks like it might even be a fiberglass composite. That is my frame of reference. I had no idea that there were hollow nubbed mechs in existence.
I tried working the Happ ones (they stink). They were hard and after you snapped them off you end up with a very rough surface that was a bear to drill straight. I really hate the Happ ones that I got last round. Furthermore the batch that I received jammed and false reject at a very high rate. I now have 18 mechs that are useless to me that I paid a lot for, I have to alter to fit into my doors, and after all of the work I am unhappy with the results.
Knowing nothing about the coin mechs in your possession, I can only ask questions and try to figure out what you have. I was mistaken when I assumed that the nubs were solid. I am sorry for any offence that you may have taken.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version