Main > Main Forum

Remote Control hacking dought

<< < (2/3) > >>

PedroSilva:
OK ... I spotted where the contacts connect to the board. Two more questions:

If I solder the cable directly to the tracks it should work, right?

The remote emitter of IR it just like a led (maybe it is

Minwah:

--- Quote from: PedroSilva on September 13, 2005, 06:25:19 am ---If I solder the cable directly to the tracks it should work, right?

--- End quote ---

Yes, but make sure you have scraped enough of the black stuff off to get a good contact.



--- Quote ---The remote emitter of IR it just like a led (maybe it is  ;D ). Can I desolder it from the board, attach it to cable and solder the cable back to the board ? It will still work ?

--- End quote ---

I would say yes, that should be fine - just make sure you get the pins the correct way around if it is an LED (diodes are particular about polarity).

PedroSilva:
Great ... on to work.

Thanks Minwah

toyfiend2004:
and just for clarification, pics of everything would be helpful so we can see both what needs to be done, and also the finished project if anyone wanted to do this in the future.   ;D

PedroSilva:
Will do as soon as there's something to see ...

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version