Main > Main Forum

miini-PAC and Millipede trackball

<< < (3/3)

MinerAl:
Looks like the same pinout to me.  Try what is in that other thread.  I don't have a mini-pac, so I don't know if there is a Hi/Lo jumper, but the u/d and l/r should be the same.

Searcher7:

--- Quote from: MinerAl on December 04, 2005, 10:02:03 pm ---Looks like the same pinout to me.
--- End quote ---

MinerAl:

--- Quote from: Searcher7 on December 04, 2005, 10:10:18 pm ---I wish I knew how to crop those images in MsPaint *before* I post them.

--- End quote ---

Open the image in paint.
Select and Copy just the part you want to see.
Go to the Image menu and choose Attributes.
Set the image to a resolution of 1 x 1.
Paste the selection back in, and the image will stretch to accomodate it.


AndyWarne:
I had another customer who was able to send some pictures with the board uncovered.
I am pretty sure these are the connections:

pins 4 and 8 are X1 and X2

Pin 10 ground

Pin 9 is 5 volts

Andy W

Navigation

[0] Message Index

[*] Previous page

Go to full version