Main > Main Forum
$2 Bezel Bowing...
dema:
I had a similar problem with my smoked plexiglas bowing in the middle. All you gotta do is take a thin strip of wood and attach it to the upper part of the cabinet in the middle and it'll keep it from bending. I used screws because it was quicker and I didn't need to hold it in place for long.
Should be a quick and easy fix.
Tailgunner:
I'd glue a cardboard stiffener to the backside of the bezel in the effected sections. The pic shows a cross section of how I'd shape it. Grey is the monitor, black is the bezel, red is the stiffener.
nostrebor:
--- Quote from: Tailgunner on September 03, 2005, 02:51:38 pm ---I'd glue a cardboard stiffener to the backside of the bezel in the effected sections. The pic shows a cross section of how I'd shape it. Grey is the monitor, black is the bezel, red is the stiffener.
--- End quote ---
exactly.
Navigation
[0] Message Index
[*] Previous page
Go to full version