Main > Main Forum
I-Pac / Mini-Pac Question
MameJunkie:
I have everything hooked up and all the switches seems to work.
BUT whatever switch I program to be the ESC, it will not function.
In the configuration program, hitting the ESC from the keyboard shows up but the button I programmed will not. If I reprogram that button to something else, it will work; that at least tells me its not a hardware problem.
Another question on the 'shift' key, my understanding is that when the 'shift' key is pressed + another key, the 'shift' function for that switch/button (ie another keycode) will be generated.
True? If so, that also doesnt seem to work. ???
Thanks for any clue on what I have missed.
Tiger-Heli:
Odd, programming seems to be working, since you can re-program away from it and get it working.
Are you using the correct sofware, which for the minipac would be here?: http://www.ultimarc.com/winipac.html
RayB:
Are the jumpers set to MAME?
MameJunkie:
The jumper is default (MAME).
The ESC part still doesn't work. I'm going to try and the ALT setting and reprogram all the swithes I need manually.
MameJunkie:
Still doesn't work.
Is what I'm doing to reset the switch keycode correct?
If I wanted P2-SW8 to be ESC when pressed,
click on the 'P2-SW8' in the configuration program and
then press 'ESC' when asked what key to assign to it.
Correct?
Navigation
[0] Message Index
[#] Next page
Go to full version