Main > Main Forum
Which games use LS-30 rotary joysticks and other questions
unclet:
Does Druin's interface board require the original wiring harness for the joysticks?
Basically, I want to know if I get some LS-30 joysticks, then should I make sure they include the wiring harness or not.
Kremmit:
With the original LS-30, I have found that you can force an IDE cable onto the pins. (It's a tight fit, but it can be done.) Then you have to remove the connector from the other end, strip the wires, and hook 'em to the Druin board.
The Happ rotary has the wires soldered directly to the rotary switch, so the harness is pretty much always attached.
vietofmars:
This person made his own Rotary interface.
http://69.33.42.246/arcade/LS30.aspx
Navigation
[0] Message Index
[*] Previous page
Go to full version