Main > Main Forum
How to change res to 640x288 ?
krick:
--- Quote from: Stobe on August 02, 2005, 06:36:15 am ---I've got the icon for Quickres in my tray, but of the 20-30 choices, 640x288 is not one of them.
Also, no matter which one I pick, I get a "Mode Change Failed" error.
Could this be because I have 2 video cards installed?
--- End quote ---
Stobe:
--- Quote from: krick on August 02, 2005, 09:56:49 pm ---
You can't have two video cards installed.
--- End quote ---
krick:
--- Quote from: Stobe on August 02, 2005, 11:28:23 pm ---Read my topic in the Monotor section and you will see why I needed the second video card.
--- End quote ---
If the colors are messed up, then it's more than likely that your monitor is messed up. If one of the color guns is not working properly, that could explain the unreadable text at certain resolutions.
--- Quote from: Stobe on August 02, 2005, 11:28:23 pm ---In fact, even with the AVGA drivers installed correctly now, my machine will not boot without that second card.
--- End quote ---
You must have your computer configured incorrectly in some way. Go into the BIOS and make sure that it is set to boot with the AGP as the primary video controller. Is there anything in the first PCI slot? This will cause IRQ sharing problems with the AGP slot on most computers.
If it's not a hardware issue, then it has to be a windows driver issue.
Stobe:
--- Quote from: krick on August 02, 2005, 11:50:05 pm ---If the colors are messed up, then it's more than likely that your monitor is messed up.
--- End quote ---
Navigation
[0] Message Index
[*] Previous page
Go to full version