Main > Main Forum

Measuring Help

(1/2) > >>

tkuper05:
Ok, I'm almost done with my cab.

toolaa:
Which game was the cabinet from?

Does the control panel have a hinge on the bottom edge and tilt out when unlocked?

Does the glass at the top of the bezel fit into some slot or opening under the marquee? 

tkuper05:
It was a Mat Mania.  I fabricated my own CP.  The CP does have a hinge and tilts outward.  There is no slot yet for the plexi.

Bill Mote:
If you're really worried about the measurement and you can't get a tape measure in there well enough use twine, fishing line, or weedeater string.  Don't use regular old kite string as it will stretch.

Have some one hold the string and then mark the bottom and top.  Then just measure between the marks.

dot

DrewKaree:
Go get yourself a FOLDING tape measure.

If you can't measure with THAT thing, your cab is simply going to fall apart anyway ;D

Navigation

[0] Message Index

[#] Next page

Go to full version