Main > Main Forum

Adding plexi to already made CP.

(1/2) > >>

electricd:
Hello,

I have a cabinet that has been done for a few years now, and I am looking to enhance it.  I really want to add artwork and plexiglass to the CP.  Currently it is 3/4 MDF which is laminated.  I have T-Molding around the edges of the panel.  My quesion is, if I were to add artwork on top of this, and then a layer of plexiglass, 1.  Would this "feel" right with the edge being just above the T molding (it "seems" to be level now) and 2.  How do you drill the holes in the plexiglass?  Thanks in advance!

ED7

xonix_digital:
Plexi:
http://forum.arcadecontrols.com/index.php?topic=38387.0

Lexan:
http://forum.arcadecontrols.com/index.php/topic,19935.0.html


-=XD=-

stevodevo:
I did the same thing just recently.  And I used lexan too - well that's what the shop made for me.  Let's just say my CP is heavy now!

I made a digital template of my CP (the old fashioned way - I measured it then drew it on my PC!) then I had to get that printed several times until it matched up correctly.  Then I could use that to get the lexan and the CP artwork done.  And I don't think it looks bad at all!

I've noticed several games in my local arcade that have the lexan/plexi whatever above of the t-molding.  Just smooth down the edges and I don't think people will complain.

stevodevo

tristan:
You could just replace that t-molding with some 7/8" to make up the difference.

electricd:
Didn't know they made such a thing.  That would be probably the best idea for me.  Now to find someone to lay the graphics out for me! (i am graphically challenged!)

Navigation

[0] Message Index

[#] Next page

Go to full version