Main > Main Forum

T MOLDING GUIDE???

(1/4) > >>

mrcram:
I've looked all over here and on the net.  I am ordering some T MOLDING for my arcade, but I would like to know how to install!!!
Is there a GUIDE on the internet anywhere that would help me step by step? please help. thank you

Bones:
Instructions.

Step 1) Machine grove with T-slot cutter.
Step 2) Push t-molding into grove.
Step 3) Have cool beer, you are now finished.

Seriously, it is no harder than this.

TalkingOctopus:
Two common problems:

1) It is really hard to push it into the 1/16" slot. 

Use a rubber mallet and hammer it in.

2) It won't bend around this corner and fit into the slot.

Remove the portion that fits into the slot for the corner.

tommy:

--- Quote from: TalkingOctopus on July 19, 2005, 01:53:22 am ---Two common problems:

1) It is really hard to push it into the 1/16" slot. 

Use a rubber mallet and hammer it in.

2) It won't bend around this corner and fit into the slot.

Remove the portion that fits into the slot for the corner.

--- End quote ---

You could even use some fine nails in the corners or glue.

xonix_digital:
liquid nailz

-=XD=-

Navigation

[0] Message Index

[#] Next page

Go to full version