Main > Main Forum

Problem with X-Box Adapters with P-360's

<< < (2/2)

CJK:
Are you using a USB connection to the X-Box? That might be the problem -- the Mini-PAC is probably grounded to the X-Box via the USB connection (which has +5V and GND in the cable) while the P360's are grounded to a different power supply. The joystick circuits are therefore always open.

-- Chris

Knoxximus:
Interesting point....I'll try a rewire and let you know how it goes.

CJK:
They actually draw very little current (enough to power four infrared LEDs, basically), so wire them in parallel to whatever's providing the +5 V and GND for the MiniPAC. (You can make a cable to plug into a USB port that will do the job for you. Or you can buy one like this.)

-- Chris

Navigation

[0] Message Index

[*] Previous page

Go to full version