Main > Main Forum

Arcade PCB info

<< < (3/3)

Q*Bert_OP:
Here is a manual and it does/should have a test switch, sorry.

http://www.crazykong.com/manuals/Xmen.man.pdf

SirPoonga:

--- Quote from: tommy on June 15, 2005, 03:56:41 pm ---Flip each switch one by one till you get into the settings, you don't really need a map to find what switch it is exactly.

--- End quote ---
No, the dipswitches usually SET the settings, not get you into a settings menu.  Example, my Double Draogn II cabinet does not have a settings menu, it's all done by dipswitch.  Like setting easy or normal hurricane kick, game difficulty, etc... That's what I was asking.


--- Quote --- Here is a manual and it does/should have a test switch, sorry.

http://www.crazykong.com/manuals/Xmen.man.pdf
--- End quote ---
To quote the manual
"switch of and switch on again with TEST SWITCH (on the PCB) pressed."

So you have a pushbutton switch on the PCB somewhere.

pointdablame:
Xmen does NOT use dipswitches.  I have a 4player Xmen cab downstairs that can prove that ;)

The arcade button in the coin door should be (is) the test switch.  Your's may be wired up incorrectly I suppose.. but that is the test switch.  Pressing that button after turning on the cab brings up the menu.  I do not have to press any button on my PCB at all.. just the test switch itself.

One thing of note.. my 4p cab does not have a free play option. It has a number of coin/credit options, but nothing that is free play.  It is not an option anywhere on the settings page.  Perhaps there is something on the PCB for it.. but I have not looked as I'm really not that intersted.  I did however find it a bit strange.

Navigation

[0] Message Index

[*] Previous page

Go to full version