Main > Main Forum
LED-Wiz USB LED and Output Control Device now available. *Blinky lights*
SirPoonga:
based formt he picture, the LEDWiz is going to be USB?
RandyT:
--- Quote from: SirPoonga on September 22, 2005, 12:15:04 pm ---based formt he picture, the LEDWiz is going to be USB?
--- End quote ---
Yes. That means that this version will be for Windows only until someone decides to try to make a Linux driver.
I'll consider a DOS version down the road, but seeing as the functionality of the device is so software dependant, it would probably only be a shadow of this one.
Randy
Tommy Boy:
SirP, look at brandon's post again. He's right. It's 8 LED's on 3 inputs: 2H, 2V, 4D. 4W=2H+2V; 8W=2H+2V+4D.
Tiger-Heli:
--- Quote from: SirPoonga on September 22, 2005, 11:52:17 am ---Actually, it you wire it right you will only have 8 LEDs indicating directions available.
You'd need one output for 2way horizontal, 1 for 2 way vertical, 1 for 4way, 1 for 4way diagonals, 1 for 8way. Then you'd wire those outputs to the appropiate LEDS. It'd be like if you used more than one button for a single input on a keyboard encoder.
--- End quote ---
Except Kangaroo - Don't remember if it's 3 or 5 - way, there isn't a down, though. And controls.ini has it wrong also, AFAICT.
SirPoonga:
--- Quote from: Tommy Boy on September 22, 2005, 12:31:37 pm ---SirP, look at brandon's post again. He's right. It's 8 LED's on 3 inputs: 2H, 2V, 4D. 4W=2H+2V; 8W=2H+2V+4D.
--- End quote ---
How can you do diagonal and regular 4 way with one input?
Wait, I get it. You just turn on the colored wires that are running down for the appropiate directional. Duh. Basically I diagramed how it is to work with only 3 inputs :) My little chart running down the side indicates which inputs to power.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version