Arcade Collecting > Miscellaneous Arcade Talk

Special Criminal Investigation (the game)...

(1/2) > >>

edwardvci:


 :)I just had donated to my youth group a Special Criminal Investigation game by taito . After checking out the unit  I have 2 problems 1 no sound 2 no force feedback. Everything looks to be there and connected but those two things do not work. If anyone knows were I can find some docs or info for this it would be appreciated

I have already been to KLOV

paigeoliver:
Well on MOST SCI's I have seen the force feedback motor is actually disconnected. Insure that it IS connected. No sound could be a few things, disconnected speaker wires, defective speaker/s, volume turned all the way down, bad volume pot, lack of -5 voltage, or something wrong with the board itself.

APFelon:
...and if the force feedback is disconnected, there is probably a mechanical problem with the assembly.  Perhaps you might get lucky, though. I used to disable the shaker motor on my Outruns because it would cause problems like shake screws loose in the long term..

Where did this SCI come from? If it came off of a route location, the volume might just be turned down. We had some clients that wanted the volume lowered or actually turned off because it was disruptive to their business.  So check the volume pot and check to see if there is a software volume adjust (I don't recall if SCI has one).

Good luck!

Apf

edwardvci:
I will check out the wiring and powersupply more this weekend. There are two pots attached to the coin door I figured one was for sound, But neither seem to do any thing.

Not sure of the life of this machine was setting in a storage building but was probably in a night club. Also there is a metal plate on the outside of the machine that reads Baily Circus arcade.

edwardvci:
anyone got info on the dip switch settings?

Navigation

[0] Message Index

[#] Next page