Main > Main Forum

Wiring up Joystick???

(1/2) > >>

Marky_1979:
Iv wired up my happs joysticks no problem but iv recently bought som e sanwa ones and not sure how to do this as i cant even see the cherry switches or the bits you connect the wires to.

Can anyone help??

JoyMonkey:
I've never wired one, but I believe you use the 5 pins that protrude from the side. They should be something like:
- Common (ground)
- Up
- Down
- Left
- Right

Edit: Here's a standard wiring harness.

dave 1945:
5 pin joystick cable
http://www.himuragames.com/store_joyacc.php

is what you need i dont know what each wire does maybe someone round here knows that.





Marky_1979:
Yes thanks guys i had seem that wire but wasnt to sure if it could be used for emulation projects. I f anyone knows what each wire does would apreciate that alot.

RayB:
The first pin is probably ground. Then the others are directions. You can just hook em up and try out the directions to see which you've mixed up.

Navigation

[0] Message Index

[#] Next page

Go to full version