Main > Project Announcements

Swappable control panel complete

(1/2) > >>

eightbit:
I built my first swappable control panel. The Ipac is mounted in the cab so each control panel plugs into it instead of needing an ipac for each control panel.

I also mounted player 1 and 2 coin buttons under the front edge of the cab on each side. My coin slots work but aren't very popular after people get over the initial wow factor of it. This way I can wow them with the coin slots then show an easy way to play.

I went to the local fabric place and bought vinyl which I glued down. This didn't turn out perfect but I think it'll be better on the next one. I also didn't use a mounting plate for the track ball which shows through the vinyl more then I'd like it to.


My next panel will be ikari warrior joysticks of which I finally have all the pieces needed to complete.

SNAAAKE:
NICE !...
I see that wireless mouse thing.THAT really works even if its inside right?
I am getting tired of the keyboard and mouse laying around my cabinet already so i gottta get goin with wireless.

anyway...good job ;).

eightbit:
Yup thats radio frequency wireless so it works from inside the cab. I had a infrared one before but it required line of site to the sensor which was kind of a pain.

hyiu:
Nice CP !!!....   ;D   ;D   ;D

I particularly like the way you mount the trackball...

I would also like to mount my Kidsball more or less the same way.....

needs to practice my wood skill for making the right hole....

nice job !!!...
 ;)

eightbit:
I have a complete wood shop so that made making the hole easy. Trace the base, cut with a scroll saw, touch it up with a oscilating spindle sander and wah-lah, a nice snug hole.

Navigation

[0] Message Index

[#] Next page