Main > Main Forum

Show me photos of your home-built 4-Player (Quad) Contol Panel!

<< < (12/20) > >>

NoOne=NBA=:

--- Quote from: markrvp on May 06, 2005, 05:12:51 pm ---I would probably never try this with regular joysticks that use switches, but I think it is going to work with the GP-Wiz 49 & 49-way joysticks.
--- End quote ---

That is exactly how the 49-way appears to MAME when using 8-way DRS mode, like you mentioned above.

I'm going to try the mapping I posted above, and see if it works.
Let me know what you find out with the analog settings.

My gut feel is that they aren't going to work either, for the same reasons mentioned above.
(X-axis=+/Y-axis=0) will have no mapping, and probably create a dead spot.

IntruderAlert:
somebody get Randy over here!

NoOne=NBA=:
Here's tested mappings.
I was able to simplify them once I got to testing.

UP=(Up NOT Left) OR (Right NOT Down)
LEFT=(Left NOT Down) OR (Up NOT Right)
DOWN=(Down NOT Right) OR (Left NOT Up)
RIGHT=(Right NOT Up) OR (Down NOT Left)

This will work with any 8-way stick, but will work best with round restricted sticks (Wicos/Monroes/P-360/49-way DRS)

markrvp:

--- Quote from: NoOne=NBA= on May 06, 2005, 05:48:29 pm ---Here's tested mappings.
I was able to simplify them once I got to testing.

UP=(Up NOT Left) OR (Right NOT Down)
LEFT=(Left NOT Down) OR (Up NOT Right)
DOWN=(Down NOT Right) OR (Left NOT Up)
RIGHT=(Right NOT Up) OR (Down NOT Left)

This will work with any 8-way stick, but will work best with round restricted sticks (Wicos/Monroes/P-360/49-way DRS)

--- End quote ---

Good job. 

How do I map that in MAME with the 49-way and GP-Wiz 49?

NoOne=NBA=:
See the thread I just started about this.
Make sure you are using the 8-way DRS mode, when you do the mappings.

Or, easier yet, use the keyboard to do it.
That way you don't accidentally hit two switches at once.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version