Main > Main Forum

Strange Question

<< < (2/2)

paigeoliver:
Previous cabinets have used every imaginable kind.

Current cabinets.

Cocktail. Has a microswitch behind the left coin return button on the coin door.

Big wooden cabinet. Has enter, tab and escape buttons on the panel. This panel was pre-drilled by a previous mamer, if I had done it myself then they wouldn't be there. This cabinet also has 2 pinball buttons on each side (also pre-drilled, I wouldn't have done those myself either), which I seem to fairly often remap as service switches, pause buttons, throttle and such.

Giagantor cocktail. I'll probably do the coin return switch trick again.

Fuzzguitar:
I don't have any admin buttons whatsoever.

P1 and P2 together (esc) with an Ipac are all I need.

They are near each other of course but have never once been accidently pressed even with little kids bashing away at games.

The nature of having a shift button makes esc harder to trigger as you need to momentarily press it before the other function.

RayB:
I'll be hiding mine on the TOP, in recessed holes.

Navigation

[0] Message Index

[*] Previous page

Go to full version