Main > Main Forum
Mini-PAC
CheffoJeffo:
Post a WTB in B/S/T ... maybe someone can tack a MiniPac on their next Ultimarc order.
Cheers
Searcher7:
I'm still in search of the next best option.
Thanks a lot.
Darren
Tiger-Heli:
www.groovygamegear.com KeyWiz Eco2 (no solder) or GP-Wiz (no-solder) and www.oscarcontrols.com pre-hacked USB mouse interface.
Searcher7:
--- Quote from: Tiger-Heli on April 02, 2005, 09:45:37 am ---
--- Quote from: Searcher7 on April 02, 2005, 08:34:07 am ---I have to do some custom wiring, and I'm not using either the Happs or Ultimarc trackball, so I guess homemade is the best way to go for me.
--- End quote ---
If it's a missile command trackball it's essentially a Happs.
The Mini-pac wiring diagram is here - http://www.ultimarc.com/mp_inst.html but it doesn't specify any differences for the different types of trackballs. I think it might be pull-up resistors, but you might want to confirm with Andy.
--- Quote ---Can anyone tell me what specific board connector/s connect to the Mini-PAC?
--- End quote ---
If you mean the pin headers on the board - They're 0.100 inch centers and you can cut a standard computer HD cable and run it to a terminal block or splice onto it.
--- End quote ---
Ok. I now have a couple of Mini-PAC PCBs.
I've noticed how thin the wires are in an IDE cable. Is it plausible to find some sort of extention header(a stand-alone IDE connector) where 20 gauge wires could be attached to each pin?
Thanks.
Darren
Tiger-Heli:
--- Quote from: Searcher7 on July 20, 2006, 10:05:44 pm ---Is it plausible to find some sort of extention header(a stand-alone IDE connector) where 20 gauge wires could be attached to each pin?
--- End quote ---
I don't think so, at least I've never seen one.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version