Main > Main Forum

Buttons double firing -- please help

<< < (6/6)

tommy:

--- Quote from: NoOne=NBA= on March 18, 2005, 08:49:44 am ---
--- Quote from: cholin on March 17, 2005, 06:01:36 pm ---Solderring is frowned upon because if you order some Quick Disconnects for $6, you have better contact
--- End quote ---

Wrong.

1) Soldering is NOT frowned upon by alot of people around here.

2) A good solder joint is a better connection than disconnects.
Do you suppose there's a reason they don't put all the guts of a radio in with press fittings?

You dont need to make your microswitch hold up in a hurricane, just as long as the wires are touching it will work, dissconnects are fine , why dont you weld your tire on the hub so theres no chance it will ever fall off, microswitches and radios , apples and oranges.
--- End quote ---

ahofle:
Well I did take apart the switch that was bad, and I tell you it's as clean as a whistle in there, with absolutely zero oxidation.  The contacts all look correct when I press the red button.  I just don't get it.  Andy from ultimarc mentioned that American made cherry switches succumb to this problem much more than the European ones.  Anyway I ordered a bunch of replacements.  I also had a friend of mine test out his buttons and he found 4 that exibited this same behavior in notepad.

Thanks again for all the help.

Navigation

[0] Message Index

[*] Previous page

Go to full version