Main > Main Forum
External mounting of USB Ports/hub
jcrouse:
Thanks, I made it myself. I got the PS/2 and USB ports from www.cyberguys.com . I cut the ends off of them and then hack in an extension cable and plug them into the mobo. The ethernet port is just a decora wall plate cut down with holes for mounting. The power entry module is from www.mouser.com. The small buttons are ms. pacman player start buttons (one for on/off and one for insert coin if needed). The L-Pads for volume control come from www.valcoelectronics.com .
Enjoy,
John
lokki:
--- Quote from: Sprucemoose on March 13, 2005, 12:24:02 pm ---I was thinking of putting this on the front of my cab aslo.
--- End quote ---
jcrouse:
Based on the link I would say directron, http://www.directron.com/
John
Chris:
I just cut a hole under the control panel overhang the same size as a USB hub. I mounted it with a strip of scrap metal bent to form a bracket that is screwed into the sides of the hub and into the wood. (Had to open the hub first to make sure the screw holes weren't near anything delicate, of course.) I spray-painted the shell of the hub black to match the cab.
The port to the right in this pic looks like a network port, but it's actually where I plug in one of my Act-Labs guns.
(Wow, pics up this close with flash on show every little flaw in the paint job.. yeek.)
mahuti:
That's what I was thinking about doing to my Defender cab.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version