Main > Main Forum
Universal Monitor/Tube mounting brackets - NO LONGER IN STOCK
Siffreddi:
--- Quote from: 1UP on March 11, 2005, 02:09:45 pm ---Why?
--- End quote ---
They accidentally froze my account 2 years ago. It was their mistake, but the hoops I had to jump through to get it corrected left me pretty unhappy.
I am very interested in your mounting bracket and if I must use PayPal then I will. I was just wondering if you have any plans to accept credit cards, C.O.D., etc.?
Thanks
1UP:
I will have credit card billing setup when I put them on my site. The credit card service costs me more than Paypal does to process a transaction though.
--- Quote ---You must not look at many arcade games then... several of mine have the carriage bolts (which hold the monitor brackets) exposed on the outside of the cabinet. Nintendo and Taito come to mind, even my cocktail T&F has exposed bolts which support the monitor.
--- End quote ---
Let's put it this way: there are cabinets with and without carriage bolts. The ones without them generally look better IMHO. Our cabinets are also very solid, using tongue-and-dado construction, and glue at every joint. They also have more cross-members than your average cab.
shmokes:
I don't see what the big deal is. These would be great either way. If you're set on carriage bolts it'll take you 3 minutes with a drill to increase the size of the holes in these brackets to whatever size it needs to be for your carriage bolts to fit through it.
Certainly a nice feature of these is the ability to use them without carriage bolts, but I don't see how they preclude your ability to use carriage bolts if you want to.
I'm decasing a 27" TV to put in my cab, but it has built-in brackets at each corner. I think I'm going to take some measurements and see if they'll work with this. If so this is a no-brainer.
Thanks 1up
shmokes:
Oh yeah....and a lip welded or bent onto the bottom of these for bezel and/or glass to sit on would be brilliant.
1UP:
--- Quote from: shmokes on March 11, 2005, 06:54:11 pm ---Oh yeah....and a lip welded or bent onto the bottom of these for bezel and/or glass to sit on would be brilliant.
--- End quote ---
That's the tricky part. There's not really any standard for how people will mount their bezels. Some have the glass secured right under the CP, others have a mirror holder along the bottom, above the CP. If I made anything for mounting the bezel, it would have to a) be compatible with our cabs, and b) be an add-on part so no one is forced to use it if it becomes a hinderance.
However, I'll look into this option since it's been mentioned a few times here. :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version