Main > Main Forum

New Product: 49-Way USB Interface - The GP-Wiz49 with DRS Technology (TM)

<< < (126/130) > >>

screaming:

--- Quote from: IntruderAlert on May 13, 2005, 11:46:19 pm ---So when's MinWah coming back to see about this anyway?

--- End quote ---

MrSalty came up with something that works in the meantime here.. 

-sab

Steve Kaz:
Randy T,

I plan on running a 49 way stick with Flloyd's rotary adapter into a Druin interface board and then into your GPWiz49.  We were discussing this on another thread and saw that the Druin needs 5 volts of power.  Could i run a second wire from the Wiz49 into the Druin?

Thanks,

Steve

stevio99:
I was looking at the spec sheet of the holes for the 49-way, and it looks like it will drop right into a Street Fighter Anniversary edition stick.  Seeing that that stick has quick disconnects, its should be pretty easy to wire up.  A guide to taking it apart is at:

http://www.arcadestickmonk.com/SFACmod.html

Most EBgames still has these sticks for $60.  So that plus $30 for the 49-way and $20 for the eco gpwiz will give you one heck of a joystick for $110 ($10 more than X-arcade).  I think this is gonna be my first project (yey, no more keyboard playing)

RandyT:

--- Quote from: Steve Kaz on May 14, 2005, 02:53:28 pm ---We were discussing this on another thread and saw that the Druin needs 5 volts of power.  Could i run a second wire from the Wiz49 into the Druin?

--- End quote ---

It depends on the current draw.  But I'll say that it should be fine.

RandyT

Flinkly:
um, you need more than quick disconnects to hook up the 49-way.  i hope you don't think you can just unhook the current joystick and stick the new one in.  if you do end up doing this project, you'll end up with two wires coming out, one for the 49-way/gpwiz, and the second for the original hookup.  or i guess you could use the gpwiz for the buttons and still have only one cord...

good luck anyways.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version