Main > Main Forum

* SlikStik Lighted Joystick Handles -New Photos- *

<< < (26/27) > >>

Brewser:
I finally set mine up tonight. These things are bright and look sweet!!
A couple things though:
1. the handle is longer than my previous super. Is there a way to change this to make them a little shorter? I have tried everything. I actually would like them down about 1/2" or so. I put them in without the top washer, and the length was great, but you can't use the joysticks that way since they won't center very well.
2. The plug on the bottom has come out twice. It is not in very tight. Is there a secret to getting these to stay on. I have only played with mine for about an hour so I don't have any long term use to the plug coming loose over time. It is pushed in all the way, so don't ask that question.
Overall a great product.

KevSteele:

--- Quote from: whammoed on August 02, 2005, 10:17:53 am ---A trigger stick p360...that would be sweet!

--- End quote ---

<Hulk>
Me want...me want NOW!
</Hulk>

Kevin

SlikStik Christian:

--- Quote from: Brewser on August 11, 2005, 11:17:34 pm ---I finally set mine up tonight. These things are bright and look sweet!!
A couple things though:
1. the handle is longer than my previous super. Is there a way to change this to make them a little shorter? I have tried everything. I actually would like them down about 1/2" or so. I put them in without the top washer, and the length was great, but you can't use the joysticks that way since they won't center very well.
2. The plug on the bottom has come out twice. It is not in very tight. Is there a secret to getting these to stay on. I have only played with mine for about an hour so I don't have any long term use to the plug coming loose over time. It is pushed in all the way, so don't ask that question.
Overall a great product.

--- End quote ---

The handles are a little higher than the stock ones and cannot be adjusted. As for the plug not staying in, you must have the loop between the end and where you put the clamp on too short which if that

Agm:
Hey Christian this is Agm from your boards too.

I get to come down to the store and pick mine up soon too?

And also does anyone have a template so I can make a nice overlay for my slikstik quad? I am unable to find anything anywhere and I really want to put down a cool costume layout on it.

Midnight Tboy:
heya,

I hope you're still checking this thread Christian.  I must say, excellent looking sticks and I'm definately after a pair from your site, definately with joysticks as they'll have to replace my T Stick Plus's.  Not sure whether to go for the blue ones or the multi coloured ones

Firstly though, am I right in thinking that these will be powered straight off the ipac4 controller I have no problems.

secondly, I like in the UK, so shipping would cost too much here, and when they add tax etc...but my parents are going to see my godparents in New York (or was it New Jersey I can't remember now - somewhere there anyways) in a week or so for a fortnight.  Would you say they'd be delivered in time for them to bring back with them, or do you have a huge backlog of demand?

dammit, I've been tryin to get this cabinet finished off and its starting to look nice now but I def need some illuminations for the cabinet :)   hmmm while I'm at it I could get some translucent pushbuttons, or one of those LED boards I've heard about..I'll have to find a source for them :)

cheers,
Tuck

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version