Main > Main Forum

J-stick install instructions(SOLVED)

(1/4) > >>

Will:
Was wondering if anyone had a link to the j-stick instructions and or diagram for installation.I looked on ultimarcs site and only found the t-stick instructions.Thanks

Will:
Does anyone own this joystick besides me?A little help please :)

captainpotato:
What's the issue? I found that I had to cut out around 8mm on the underside of my 17mm CP, drill out a hole for the shaft and mounting screws, put the dust cover over the stick, slide the shaft through the hole, screw the joystick onto the CP and then screw the balltop on.

It shouldn't be any more complex than this in most cases.

TalkingOctopus:
They have a mounting diagram on there website under controls->diagrams, but I am sure you've already seen that.  If you are really confused about how to assemble the joystick, you should give Andy of ultimarc an email and I am sure he'll help you out.  He has a reputation for good customer service. andy@ultimarc.com

Will:
The truth of the matter is I took it apart months ago and forget the sequence of all the parts.I know that it goes red handle,than dust washer after that I'm a little fuzzy.I still have spring,black sleeve thing and silver sleeve thingy and the e-clip.I emailed Andy but no response yet.If anyone can tell me the order of these parts I would appreciate it.I know I should have taken a digital pic before I took it apart.  ;D

Navigation

[0] Message Index

[#] Next page

Go to full version