Main > Main Forum
Tron restrictor on Xenophobe Joy
coasternuts:
I knew I should have taken better photos. Sorry.
I am concerned about two things: that the restrictor on bottom would not fit, and the second is that the top is a square restrictor and without replacing that too, there would be no point.
NoOne=NBA=:
You've got a few choices as to how to attack this.
The easiest is to just buy a Tron bottom, and be done with it.
The second is to modify your existing stick, and MAKE it a Tron Stick.
I haven't actually DONE that mod, but I measured everything for it, and it will work.
To do it, you need to rotate the top restrictor 45 degrees, hack the corners off, and remount it, and also turn the bottom restrictor.
I measured the DOT/Xeno top restrictor, and it has the same dimensions as the Tron stick, but different orientation.
Rotating the bottom restrictor is really easy.
Kremmit:
The bottom restrictor from an original Pac stick has the diamond orientation already, if you want to find one of those.
NoOne=NBA=:
I think you and I are amongst the few that would have one laying around though, Kremmit.
coasternuts:
I sucked it up and bought the Tron base.($30 ouch.) Now having done that, I'm tempted to by the specialtyplastics repro handle, though I'm concerned about getting the proper switching and mounting accessories for it.
I'll post whether the restrictors match.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version