Arcade Collecting > Miscellaneous Arcade Talk
Astro Blaster Z-80 Arcade Machine Help
bluemanop:
Anyone got any ideas out there?
crsdawg:
what are the output voltages of the psu? if they are typical you could swap it out for a switcher. it would be a good idea even it the power supply isn't your problem.
bluemanop:
I have a new power supply from WEI-YA Model P031 but I am thinking that I am going to be out of luck on the -12 volts side. This does +5, -5, and +12. Do you think I can just flip the wires on the +12 volts?
I am rookie when it comes to arcade machines, so bare with me. Do you think I should run this through the isolation transformer that is currently powering that old power supply? or can I just cut a computer power cord and run wall current to this new power supply on the AC/N and AC/L inputs?
crsdawg:
well, i'm no guru on the subject but i'll try to help best i can. make sure to get more than
Rocky:
I'll confirm that you don't want to use the Isolation transformer for your new power supply.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version