Main > Main Forum
J-Pac / I-Pac
chris2922:
Could someone please explain to me what the difference is between the J-Pac and the I-Pac. I was going to buy a J-Pac and an ArcadeVGA to interface my JAMMA cab to a bare bones Pc. Before I do though, id like to know what the difference is.
SirPeale:
They're both the same for inputs. The J-PAC has the added functionality of being able to plug directly into a JAMMA harness. It amplifies the video signal to a level the monitor can use.
krick:
The J-PAC also has a video circuit that divides a 31KHz VGA signal so that it cannot damage your arcade monitor if you accidentally send it a VGA signal.
This is most useful for people running DOS cabs with AdvanceMAME and a "normal" (non ArcadeVGA) video card.
When booting with a normal video card, there is a brief period during the BIOS display where a 31KHz signal comes out of the card. Then when AdvanceMAME loads, it reprograms the card to display a 15KHz signal.
Since my cabinet was already wired for JAMMA, I went with a J-PAC and an ArcadeVGA. I also picked up an additional I-PAC2 so I could hook up the player 3 & 4 controls, and an Opti-PAC for the trackballs and spinners.
chris2922:
Great, sounds good. I'll get on and order them then. Thanks both.
paigeoliver:
Since I first used the Jpac I now reccomend them for everyone, not just people using arcade monitors. Wiring is simple and easy with a JAMMA harness. Not to mention a lot less fragile. Plus the J-Pac makes swappable panels a breeze.
If you have a J-Pac and a Bob Roberts JAMMA harness then you won't even have to THINK, as every wire will be labeled for you.
Navigation
[0] Message Index
[#] Next page
Go to full version