Main > Main Forum
Powering the coin door lights
(1/1)
Beeeph:
after buying a used but functional coin door w/mechs for $20 on ebay :o, I was confused a bit by the wiring:
with this connection, it looks like I can directly hook up two standard molex connectors from my PC power supply.
Thenasty:
jsut cut/trace the wires from the bulb (looks like green/blue) and then make sure what voltage those lamps accept and use the PC power supply to hoo it it. RED wire on PC is 5volts and yellow is 12V.
terryd:
How do you find out what voltage the bulbs are? Is there an indicator on them?
Trimoor:
Try it with 5v, and if that's too dim move up to 12v.
Ken Layton:
Take the bulbs out of the socket and look at the numbers on them.
Here are typical bulbs and voltages:
159, 259, and 555 are all 6 volts
161, 194, and 658 are all 12 volts.
Navigation
[0] Message Index
Go to full version