Main > Main Forum

Problems With Control Buttons

<< < (2/3) > >>

kommando2004:
Thank you for all the replies. I just disconnect the two wires behind one of the good buttons and reconnected on to the one that wasn

ddockery:
To remap, while inside MAME, press the TAB key.  From there it should be pretty straightforward.

Tiger-Heli:

--- Quote from: Apollo on November 21, 2004, 12:08:04 am ---I thought MAME didn't support buttons 5 & 6. Don't you have to map these seperately?

--- End quote ---
Mame does not initially support buttons 5 and up for Player 2.  Player 1 should be working, and Player 2 should work after configuring in the TAB menu.

paigeoliver:
Fire up NOTEPAD and press those buttons and see if they are sending any keys.

They probably aren't mapped.

Or, your cabinet might have a JPAC in it, and the builder didn't bother to do the extra wiring for buttons 5 and six.

kommando2004:
I press tab and went into the Input General, and selected player1 button the 5 and 6 button pressed enter on my keyboard, then I started to press the buttons themselves on the control panel, there is no response registering on the screen. How do I get into notepad, I will need to hook up the computer to a PC monitor first, because the window 98 screen on my cabinet is spilt and warped. Thank you again all for your helpful responses.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version