Main > Main Forum
Is there a std way to keep track of Jamma connections? Which wire goes where?
SirPeale:
Maybe it was one of Bob's harnesses?
Here's a JAMMA pinout:
http://www.pealefamily.net/tech/mame/jamma.html
Goz:
You can get a new JAMMA harness for between $10 and $20 from Bob or eBay, etc. These hardness' are usually labled. If you are doing a clean up... You could replace the harness.
-Goz
RayB:
I followed Bob's JAMMA harness instructions on how to group the wires with cable ties. I then labelled each group with a piece of masking tape (ie: "video", or "Player one"). You could take it a step farther and label each wire.... Why not? I didn't because the JAMMA connector itself is labelled.
paigeoliver:
--- Quote from: Peale on November 07, 2004, 08:33:58 pm ---Maybe it was one of Bob's harnesses?
Here's a JAMMA pinout:
http://www.pealefamily.net/tech/mame/jamma.html
--- End quote ---
Well to clarify, I bought a new harness from bob, and a pre-wired multiwilliams panel from Apollo amusements, and the colors of all the wires matched. They wouldn't have been chopping up Bob's harness's to make these (too costly to do that), so I must assume they made them the same color on purpose.
SirPeale:
Paige: I misunderstood. I thought that you bought a JAMMA harness from Appolo, and those colors matched one of Bobs.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version