Main > Main Forum

Common buttons for joysticks/trackballs

<< < (2/3) > >>

Hiub1:
If you go with my suggestion, it will not matter how many buttons you need for a TB game since you will be using the 1P and there are 6 available there. Same thing with everything else, If I were building it, I would position things so that say the 4 way and the spinner used the same buttons as maybe p1 p2 and p3 or soemthing along those lines.

Kobex:
If you haven't grabbed it already, download the visio stencil set from the download section of the main byoac page.  The one I used was the one from Jason at the very bottom of the downloads link.  It's handy if you're using Happ controls.

I took that file and started a new project from scratch.  I just completed the control panel tonight (for the most part).  Maybe you can use something in there as an example.  My visio file can be found here:  http://pages.sbcglobal.net/kobe/arcade_controls2.vsd

The control panel looks like this:

Lilwolf:
ahhh

ALL THE BUTTONS ARE ON THE WRONG SIDE....

but I'm left handed...

GGKoul:
I put 3 buttons on top of my trackball for Left / Right mouse clicks.  Makes web surfing and playing Golden Tee alot easier.  Also wired the 3 buttons to act a Fire1 Fire2 Fire3, primarly for Missle Command and some other trackball games.

paigeoliver:
You really use your Mame cabinet for web surfing?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version