Main > Main Forum

ipac 4 problem + ps/2 trackball

(1/2) > >>

mcdo15:
hi..
i have IPAC4 (it may be faulty - still trying to figure it out) hooked up ps/2 style to keyboard and a PS/2 mouse/trackball with 3 button hookup.  

everytime i move trackball, what ever is mapped to player 1 sw8 goes off.  Is there a way to to disable that sw?..  or is it faulty?

thanks

any ideas...once again, ipac may already be bad...i'm doing more test before andy declares decalres it dead

i would ask andy but i think he's off for the weekend

krick:
Are you saying that you have the IPAC4 plugged into the keyboard port on your motherboard and you have a PS/2 trackball plugged into the keyboard passthrough port on the IPAC4?

If so, you can't do that.  The port on the IPAC4 is for a keyboard only.

You'll have to plug your trackball into the PS/2 mouse port on your motherboard.

mcdo15:

--- Quote from: krick on October 31, 2004, 02:12:40 am ---Are you saying that you have the IPAC4 plugged into the keyboard port on your motherboard and you have a PS/2 trackball plugged into the keyboard passthrough port on the IPAC4?

If so, you can't do that.  The port on the IPAC4 is for a keyboard only.

You'll have to plug your trackball into the PS/2 mouse port on your motherboard.



--- End quote ---


no..i do understand thatnk

ipac is wired to keyboard port with acutal keyboard on ipac passthough

ps/2 mouse/trackball wired to mouse port.

only have 1 wired hooked up at the moment to test other connections

reebboy:
So are you saying that you have your keyboard hooked up through your IPAC passthrough. Have you tried disconnecting your keyboard from the IPAC and seeing what happens??

mcdo15:
yes, it still does what key is map to that with keyboard passthough NOT hooked up

Navigation

[0] Message Index

[#] Next page

Go to full version